Contact Us   |  Phone: 888.998.9975  |  Fax: 386.238.0976

Welcome to the NEW Price Performance Leader
of In Line Load Lock Batch Sputtering Systems
and Thin Film Technology

Thin Film Coating Quote Request Form

Client Contact Information
Please fill out the following information, so that we can correctly route the quotation to you. MAT-VAC quotations are normally emailed.

Name:
Company Name:
E-Mail Address:
Address:
 
City:
State/Province: Zip Code:
Country:
Phone: -
Fax: -


Thin Film Coating(s) To Be Quoted
Please fill out the following information, to the best of your ability, so we can quote you correctly. If you are not certain about a process parameter, then please provide your best estimation or leave blank. A process specialist will contact you for additional information.

Thin Film Coating quotations typically consist of a daily flat rate plus a one time setup charge. Depositions involving precious metals will include an additional charge. Submit multiple requests if more than one Thin Film Coating project quote is required.


Thin Film Application:  
If Other, Explain:

Number and size of wafers, lens, coupons, samples, substrates, fragments to be processed per run and substrate material composition:


Deposition No. 1
Material:  
Sputtering Mode:  
  If other, explain:
Desired Thickness:
(in angstroms)		  
Desired Uniformity:  
Other:
e.g. refraction index, resistivity, transmission, reflectivity...		  

Process Conditions: Check all that apply
Substrate Heat Substrate Cooling
RF Sputter Pre-etch RF or DC bias
Substrate Movement Static Deposit
Reactive Sputtering
Deposition No. 2
Material:  
Sputtering Mode:  
  If other, explain:
Desired Thickness:
(in angstroms)		  
Desired Uniformity:  
Other:
e.g. refraction index, resistivity, transmission, reflectivity...		  

Process Conditions: Check all that apply
Substrate Heat Substrate Cooling
RF Sputter Pre-etch RF or DC bias
Substrate Movement Static Deposit
Reactive Sputtering
Deposition No. 3
Material:  
Sputtering Mode:  
  If other, explain:
Desired Thickness:
(in angstroms)		  
Desired Uniformity:  
Other:
e.g. refraction index, resistivity, transmission, reflectivity...		  

Process Conditions: Check all that apply
Substrate Heat Substrate Cooling
RF Sputter Pre-etch RF or DC bias
Substrate Movement Static Deposit
Reactive Sputtering
Deposition No. 4
Material:  
Sputtering Mode:  
  If other, explain:
Desired Thickness:
(in angstroms)		  
Desired Uniformity:  
Other:
e.g. refraction index, resistivity, transmission, reflectivity...		  

Process Conditions: Check all that apply
Substrate Heat Substrate Cooling
RF Sputter Pre-etch RF or DC bias
Substrate Movement Static Deposit
Reactive Sputtering
My requirement is:
Immediate, formal quote needed
Inquiring Only: No quote needed at this time. Add me to your mailing list for future

Additional Comments:


  




Terms & Conditions/Warranty   |    Credit Application   |    Disclaimer   |    OEM Policy   |    Privacy Policy   |    Email Us   |    Contact Us
Copyright © 2001-2008 - MAT-VAC Technology, Inc.   All Rights Reserved.