Drop Down Menu
Thin Film Coating Request for Quotation
Client Contact Information
Please fill out the following information, so that we can correctly route the quotation to you. MAT-VAC quotations are normally emailed.
Name:
Company Name:
E-Mail Address:
Address:
City:
State/Province:
Zip Code:
Country:
Phone:
-
Fax:
-
Thin Film Coating(s) To Be Quoted
Please fill out the following information, to the best of your ability, so we can quote you correctly. If you are not certain about a process parameter, then please provide your best estimation or leave blank. A process specialist will contact you for additional information.
Thin Film Coating quotations typically consist of a daily flat rate plus a one time setup charge. Depositions involving precious metals will include an additional charge.
Submit multiple requests if more than one Thin Film Coating project quote is required.
Thin Film Application:
Microelectronics
Hybrid Devices
Discrete Components
Optical Coatings
Materials Science
Energy-Related Films, etc.
Other:
If Other, Explain:
Number and size of wafers, lens, coupons, samples, substrates, fragments to be processed per run and substrate material composition:
Deposition No. 1
Material:
Sputtering Mode:
RF Diode
RF Magnetron
DC Magnetron
DC Pulsed Magnetron
Other:
If other, explain:
Desired Thickness:
(
in angstroms
)
Desired Uniformity:
Other:
e.g. refraction index, resistivity, transmission, reflectivity...
Process Conditions:
Check all that apply
Substrate Heat
Substrate Cooling
RF Sputter Pre-etch
RF or DC bias
Substrate Movement
Static Deposit
Reactive Sputtering
Deposition No. 2
Material:
Sputtering Mode:
RF Diode
RF Magnetron
DC Magnetron
DC Pulsed Magnetron
Other:
If other, explain:
Desired Thickness:
(
in angstroms
)
Desired Uniformity:
Other:
e.g. refraction index, resistivity, transmission, reflectivity...
Process Conditions:
Check all that apply
Substrate Heat
Substrate Cooling
RF Sputter Pre-etch
RF or DC bias
Substrate Movement
Static Deposit
Reactive Sputtering
Deposition No. 3
Material:
Sputtering Mode:
RF Diode
RF Magnetron
DC Magnetron
DC Pulsed Magnetron
Other:
If other, explain:
Desired Thickness:
(
in angstroms
)
Desired Uniformity:
Other:
e.g. refraction index, resistivity, transmission, reflectivity...
Process Conditions:
Check all that apply
Substrate Heat
Substrate Cooling
RF Sputter Pre-etch
RF or DC bias
Substrate Movement
Static Deposit
Reactive Sputtering
Deposition No. 4
Material:
Sputtering Mode:
RF Diode
RF Magnetron
DC Magnetron
DC Pulsed Magnetron
Other:
If other, explain:
Desired Thickness:
(
in angstroms
)
Desired Uniformity:
Other:
e.g. refraction index, resistivity, transmission, reflectivity...
Process Conditions:
Check all that apply
Substrate Heat
Substrate Cooling
RF Sputter Pre-etch
RF or DC bias
Substrate Movement
Static Deposit
Reactive Sputtering
My requirement is:
Immediate, formal quote needed
Inquiring Only: No quote needed at this time. Add me to your mailing list for future
Additional Comments:
Sputtering Systems Quote Request
Materials Quote Request
Thin-Film Coating Quote Request
Miscellaneous Quote Request
MAT-VAC Technology, Inc.
PO Box 2299
Daytona Beach, FL 32115
Tel: (386) 238-7017 | Fax: (386) 238-0976
Contact Us
|
Request a Quotation
Home
|
Sputtering Systems
|
System Parts
|
PVD Materials
|
Services
Credit Application
|
eBay Store
|
News
|
Contact Us
|
Privacy Policy
|
Legal Disclaimer
Copyright © 2001-2011 - MAT-VAC Technology, Inc. All Rights Reserved.
